The Stone Letter Book
Care

Caring for Lettered Stone: Cleaning, Lichen and Renewing Letters

An inscription outlives the people who ordered it, but only if it is left in reasonable condition. Gentle care, done rarely, keeps letters readable far longer than scrubbing.

What weathering actually does

Weathering is the breakdown of rocks and minerals at the Earth's surface through contact with water, atmospheric gases and living organisms, acting in place rather than by carrying material away. On an inscription it shows first in the detail: crisp edges soften, fine serifs round off, and any paint or gilding in the letters wears long before the stone itself changes much. A memorial that looks tired is usually dirty or faded rather than worn out.

Clean gently, and seldom

The safest cleaning is the mildest that works: plain water, a soft brush, and patience. Work from the bottom of the stone upwards so dirty water does not run over dry stone and leave tide marks, and rinse as you go.

Lichen, moss and algae

A lichen is a composite organism formed from algae or cyanobacteria living among the filaments of a fungus. Lichens grow readily on bare stone and are known to contribute to its weathering. Thick growth can fill cut letters until an inscription is unreadable, but removing it forcibly often takes the stone surface with it. Light growth on a sound stone is frequently better left alone; heavy growth on a memorial you are responsible for is a reasonable thing to ask a specialist about.

Staining, patina and salts

Not every mark should be removed. Patina is the thin surface layer that forms on stone and metal over time, and on an old inscription it is part of its age. Two marks are worth distinguishing from it: rust-coloured streaks, which usually come from iron fixings or nearby metalwork, and the white powdery bloom of efflorescence, which is salt migrating to the surface of a porous material and crystallising there. Both point to a cause, such as a corroding cramp, trapped water or salts in the ground, and treating the surface without dealing with the cause only delays their return.

Renewing paint and gilding

Painted and gilded letters are the part of a memorial that most often needs attention, because the finish is a coating on the stone rather than the stone itself. Renewing it is ordinary maintenance, not repair. Ask the workshop which finish was used, how it is reapplied, and whether the whole inscription or only the faded lines will be redone, so the lettering does not end up in two different tones.

Adding a later inscription

When a second name goes on a stone that has stood outdoors for years, the new cut will look brighter and sharper than the old lettering for some time. A good letter cutter will match the style and spacing as closely as the original setting-out allows and tell you plainly what will not match. Get a full proof for the new lines, checked the same way as the first.

Leaning, settlement and safety

A stone that has begun to lean, rock or sink is a different matter from a dirty one. Do not try to straighten or re-bed it yourself; the weight is easy to underestimate. Report it to whoever manages the site and ask for a mason to look at the foundation.

Keep a record

Note what you did and when: the date, the method, anything you noticed. The next person to care for the stone may be decades away, and a short written note is the only part of the maintenance that does not weather.

Cemeteries and churchyards usually set rules on cleaning, repairs and who may work on a memorial. Ask the site office before starting, even for washing.

Cut 2026-11-18